ARC-IPMH01


Rating: Not Rated Yet
1.3 Megapixel IP Pinhole Camera 3.5mm Lens 12VDC POE
• 1280 x 960 high resolution
• 120dB WDR
• RoI, SVC video compression
• Micro SD/SDXC, up to 64GB
• 3 video streams
• Hallway mode
• Motion detection
• Alarm I/O
24h.gif
Description
Model: ARC-IPMH01
Image Sensor:  1/3" Progressive SCAN CMOS
Minimum Illumination:  0.04 Lux @ (F2.3, AGC ON)
Shutter Time:  1s ~ 1/100,000s
Lens:  3.7mm @F2.3, angle of view: 57 °
Lens Mount:  M12
Day& Night:  Electronic
Digital Noise Reduction:  3D DNR
Wide Dynamic Range:  120dB
Noise reduction:  3D DNR
Video Compression:  H.264/Mpeg4/M-JPEG
H.264 Compression Profile:  Baseline profile / main profile / high profile
Bit Rate:  32 Kbps~16Mbps
Audio Compression (-S):  G.711 / G.726
Audio bit rate (-S):  64Kbps (G.711) / 16Kbps (G.726)
Max Image Resolution:  1280x960
Frame Rate:  60Hz: 30fps (1280 × 960), 30fps (1280 × 720)
Image Settings:  Saturation, brightness, contrast adjustable through client SOFTWARE or web browser
BLC:  Yes, zone configurable
3rd stream frame rate:  Independent with Main Stream and Sub Stream, up to
  60Hz: 30fps (1280 × 960)
Eclipse:  Yes
Day/Night mode:  Auto, pre-defined time or alarm triggering
Picture overlay:  128 x 128, BMP 24bit, zone configurable
ROI codec M:  Max. 4 ROI areas
Alarm Trigger:  Motion detection, face detection, dynamic analytic, tampering alarm,
  network disconnect, IP address conflict, storage exception, storage error
Protocols:  TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE,
  SMTP, NTP
System Compatibility:  ONVIF, PSIA, CGI
SECURITY:  User Authentication, Watermark
Communication Interface:  1 RJ45 10 M / 100 M Ethernet interface
Video Output:  1 x RJ12 interface
Reset button:  Yes
Alarm IN:  2
Alarm OUT:  1
POWER Supply:  12 V DC ± 10%; PoE (802.3af)
POWER Consumption:  max. 5.5W
Working Temperature (Operating Conditions):  -30 °C ~ 60 °C (-22 °F ~ 140 °F), humidity 95% or less (non-condensing)

Reviews

There are yet no reviews for this product.